Skip to main content

Fueling Equipment in SinglePoint 3.5

SinglePoint 3.5 allows line service personnel to record fuelings for FBO vehicles and ground support equipment (GSE), such as tugs, fuel trucks, belt loaders, and other equipment.

Written by Jessi McCombs

Before You Begin

Before processing an equipment fueling:

  • Confirm the equipment has been created in X-1FBO.

  • Verify the correct fuel type is assigned to the equipment.

  • If using a Rapid Fueling Tag, make sure a tag has been generated and assigned to the equipment in X-1FBO.

Start an Equipment Fueling

  1. Open SinglePoint 3.5.

  2. Click Fueling Tab.

  3. Choose Truck/Tank

  4. Click + New Fueling

  5. Locate the equipment using one of the available methods:

    • Search for the equipment manually.

    • Scan the equipment's Rapid Fueling Tag.

  6. Select the appropriate piece of equipment.

Tip: If the equipment has a Rapid Fueling Tag, scanning the tag eliminates the need to manually search for the equipment.

Enter Fueling Details

  1. Enter QTY or Start/End Meter #'s

  2. Verify details match Tank/Truck

  3. Choose Save

Using a Rapid Fueling Tag

For equipment configured with a Rapid Fueling Tag:

  1. Click Fueling Tab.

  2. Choose Truck/Tank

  3. Click + New Fueling

  4. Scan the QR code or RFID tag attached to the equipment.

  5. SinglePoint will identify the associated equipment and open its fuel entry.

  6. SinglePoint will also verify the appropriate fuel type for the selected equipment.

  7. Continue with the normal equipment fueling process.


Troubleshooting

Can't find the equipment?
Confirm the equipment has been properly configured in X-1FBO and is available for use.

Rapid Fueling Tag isn't scanning?
Confirm the tag is still associated with the correct equipment record. If the previous tag was unbound, a new Rapid Fueling Tag may need to be generated.

Wrong fuel type?
Stop before completing the fueling and verify the fuel type configured for the equipment in X-1FBO.


Need more help? Contact X‑1FBO Support for further assistance

Did this answer your question?